When trying to use a different monitor with our PC, we sometimes have a signal problem. While working, the monitor may go to sleep, or the computer may be restarted or restarted for the day, causing this problem.

Is your Asus monitor HDMI not receiving a signal? It’s possible that this issue stems from an issue with the connection, a broken cable, or obsolete divers. In certain cases, resetting the connections, changing the wires, and fixing may be all that is necessary.

What may be causing this no signal problem will be discussed here. After that, we’ll take a look at the options by breaking them down into three categories: first, second, and third. We sincerely hope that this post will be sufficient to relieve you of your current monitor woes.

At a Glance: The Problem and the Solution

Now that we know why your Asus monitor isn’t working, let’s look at some alternative fixes.

Reasons  Solutions 
Your power supply is interrupted.  Ensure an uninterrupted power supply. 
The cables are broken or damaged.  Replace your old damaged cable.
Your device drivers are out of date.  Perform necessary updates. 
Monitor’s refresh rate is not accurate.  Reset monitor or factory settings. 
Hardware damage in PC Takes some repairing actions. 

Get To The Bottom Of It First.

You can cure your problem quickly if you know what’s causing it. When your Asus HDMI monitor does not respond, you need to know the cause of the problem so that you can fix it. In addition, you can take steps to prevent the problem from occurring again in the future.

Power Supply Issues

Keep in mind that proper operation of your electronic equipment necessitates a steady stream of power. An unreliable power source might do serious damage to your computer. HDMI signal loss can also be caused by using a shoddy adapter or multiplug with a shoddy cable.

Damage to a Wiring

A damaged HDMI cable is the most common cause of an HDMI no signal message. In addition to your power cable and DVI cable, you may also lose your DisplayPort or HDMI cable. The cord’s power supply capacity can be harmed if the wrong thread is used in the wrong port.

Display Port That Has Been Infected

It’s possible that the ports on the back or underneath your Asus monitor will be harmed as well. The HDMI port, as well as other display ports, can be damaged by improper insertion, overheating, or overload. This can be caused by a lack of knowledge about which port is compatible with which cable.

Incorrect Drivers

The display may stop operating if the relevant drivers, such as those for your chipset or graphics card, are out of date. Due to their inability to match and recognize the new display, out-of-date graphic drivers have rendered themselves useless.

A Hardware Issue Has Occurred.

Incorrect positioning, bad configuration, and loose connections can all harm your PC’s hardware. Monitors can malfunction from the inside out. Hardware like a video card, CMOS, or motherboard can also fail to function properly if they are faulty, loose, cracked, or burned.

Asus Monitor HDMI No Signal Solutions

No technology, including your Asus monitor, is error-free. Make sure you don’t lose any control if your HDMI-based Asus monitor is not showing any signal. You can resolve this problem by following a few simple but effective steps.

First-Line Options

Examine the source of your power.

To begin, you must ensure that you have a steady source of electricity. If your main or wall outlet, socket, and receptacle are working properly, you can proceed with your project. Use an adaptor to power both your display and power supply at the same time, if you have both.

Initiate A New Connection

The first step is to restart or reconnect all of your devices and all of their connections. Remove the power cords from your television, monitor, and computer. Remove all HDMI cables from the computer, monitor, and adapter. Reconnect them all and get to work after some time.

The Ports of Call

You need to check the HDMI ports first because this is an HDMI-related issue. Inspect your monitor, computer, and HDMI adaptor for dirty or broken HDMI inputs. Disconnect and re-connect the HDMI cable from each of the ports on your TV.

 

Damaged cables need to be replaced.

It’s best to toss away damaged HDMI cables and monitor power cables and get new ones as soon as you see any damage. Using outdated HDMI cables or patching them with scotch tape is also a bad idea.

Is it your television or your cable provider?

Replace the HDMI cable that’s connected to your Asus display if the first one doesn’t work. You have a problem with your cable if it does not work. Use a different computer to see if it works. You’ll be able to determine if the problem is with the hardware and go on.

Optional Remedies

Maintain Up-to-Date Driver Software

Your graphics card or driver must be updated to the most recent version. Update the chipset drivers in display settings as well. Use a third-party setup if you don’t know how to or are afraid to update the drivers, and it will do so automatically.

Ensure you have the proper resolution and refresh rate set.

Check to see whether your Asus monitor’s resolution is lower than your graphics card’s before turning it on. The graphics card needs to be able to support the monitor’s resolution, so make the appropriate adjustments. A refresh rate check is also a good idea.

Monitors need to be reset.

The final resort before resorting to hardware is to perform a factory reset on your Asus display. The option to reset depends on the type of display. Hopefully, the HDMI no signal issue can be fixed by a factory reset.

The Final Answers

Check Your Computer’s Hardware.

Even if you’ve tried all of the above, there’s a good chance the issue stems from your computer. Open the PC’s case and make sure that all of its components are in good working order and have not been damaged or replaced.

It’s a good idea to double-check your video card’s CMOS, graphics card, RAM stick, and motherboard. If you discover a problem, don’t hesitate to visit a nearby service center and have the broken part repaired.

Actions That Are Necessary

In order to fix the HDMI no signal problem on an Asus monitor using our suggested fix, you’ll need to make a few software and hardware changes. How do we do this?

Actions taken by the software

How To Update Device Drivers  How To Reset Asus Monitor 
Open the context menu by right-clicking on the Start Menu  From under your monitor press the button beside the power button  
Choose the Device Manager button  Choose the menu option 
Select Display Adapter option and get the Drivers list of the pc  Select the wrench icon to open System Setup option 
Right-click on the driver that you want to update  Click on the More button
Press on the Update Driver option  Select  the All Reset option at the last 
Finally, select Search automatically for updated driver Software option Now click on Yes 

Hardware Actions

How To Reset Video Card  How To Reset CMOS
Unfold the case of your PC Open your PC’s case 
Find the video card in there  Find the CMOS battery 
Remove it and firmly place it again  Remove it gently from the motherboard 
Or try replacing it into another slot  Wait for one to five minutes 
Close the case properly  Set the CMOS to its place properly 

Tips

  • Before you begin any hardware activity, turn off your power supply.
  • Unplug all of the gadgets’ cables one at a time.
  • Avoid putting undue stress on any portion of your body.
  • Ensure that you open and close the computer casing correctly.
  • The parts must be thoroughly cleaned of any dirt and dust.
  • Work in a clean environment and on a clean surface at all times.
  • If you want to follow Asus’s advice, you can.

HDMI VS VGA VS DVI

We recommended to connect different cables with their ports properly to avoid issues like HDMI signal error. Now we will learn a little basic about HDMI port, VGA port, and DVI port. 

HDMI VGA DVI 
Stands for High Definition Multimedia Interface Stands for Video Graphics Array Stands for Digital Visual Interface
Carries 19 pins  Contains 15 pins Equipes 29 pins
High-Definition compatible colors and resolutions  RGB color (Red, Green, and Blue) Update version of VGA resolution
Transmits high-definition audio/video Sets the basic standard for color resolution Displays a true-color pallette.
Originated by many companies in December of 2002 Developed by IBM in 1987 Designed by Digital Display Working Group in 1999

Frequently Asked Questions

Is It Possible That The Power Supply Is Causing No Signal?

Yes. No signal can be detected if the power supply is poor or interrupted. The monitor will not be able to process and act properly if the HDMI signal is not properly powered.

Is There Anything You Can Do If Your Computer Isn’t Recognizing Your HDMI Monitor?

Remove and then re-insert the HDMI cable into the port. Another thing to try is unplugging your devices. Also, try resetting your monitor to see if it fixes the issue.

What’s the problem with my Windows 10 HDMI monitor?

Your multimedia interface may malfunction and cause this. You either have a bad HDMI cable or your graphics card doesn’t support your monitor’s resolution.

How Do You Repair Your Asus Monitor’s HDMI Port?

To be on the safe side, double-check the HDMI connector on your computer. If it’s bent or cracked, you might be able to fix it at the repair shop. Make sure the HDMI connection is clean and dust-free before connecting a new cable.

What’s the Difference Between HDMI and Displayport?

Both HDMI and Displayport connectors can be used to play games. DisplayPort, on the other hand, provides a higher-definition signal than HDMI. In addition, it helps the graphics card maintain a higher resolution and refresh rate balance.

Your Asus Laptop Screen Is Going Black All the Time!

An error in the graphics driver is to blame. Update your graphics and other device drivers if you haven’t already. The graphics driver, in particular, should be reset if necessary.

Connect Your Asus Monitor To Your Computer.

DisplayPort or HDMI cables are required to connect the devices. You should connect one end of the cable to the monitor’s connector and the other end to your PC’s port without any effort.

Is Your Problem Solved?

As soon as you try to connect a second monitor to your computer with an Asus display, you may lose all of your computer’s signal. People who only have one monitor, on the other hand, may run across this problem very frequently. You may easily remedy the issue if you follow our advice.

Keep your tamper handy and examine your cable, port, or any other PC component for damage. Running programs on your computer can disrupt the equilibrium between your computer and monitor, so turn them off.

If you’re experiencing HDMI no signal on your Asus display, it’s either a software or hardware issue. Our step-by-step instructions will help you discover out what’s wrong with your monitor and how to fix it.